Paint

The conical mandrel may be used to establish two properties of a coating; its resistance to cracking and/or detachment from its substrate and its elongation during the test. This is accomplished by bending the test material around a conically shaped metal bar. It is suitable for use with metal panels up to 0.8mm thick (flexible substrates up to 5mm in thickness) e.g. polythene or synthetic rubber. The apparatus consists of a steel mandrel 203mm in length and tapering from 38mm to 3mm in diameter. It will accommodate test panels up to 19cm x 11cm in size. A graduated scale on the clamping bar indicates the mandrel diameter at which failure has occurred. When this diameter is added to the thickness of the panel used, the percentage elongation can be calculated.

45 or 60deg Head Gloss of the surface is the ratio of light reflected from the surface of the sample to the light incident on it, when the angle of incidence and reflectance are equal numerically but opposite in sigh i.e. Gloss is a measure of how well the surface functions as a mirror. Gloss increased as the angle of incidence increases. The unit is lightweight and with a inbuilt measuring head having, integral readout unit, with controls for setting the value of standards and holding the displayed value. In addition, there is an averaging facility to allow for surface variations

Double slot, Steel

Use for single type of pannel Ferrous OR Non-Ferrous. Range : 0 to 600 Microns. 01. Coatmeasure – M : measure non-magnetic coating on Magnetic base. It is ideal for coatings on M. S. (Ferrous base) 02. Coatmeasure – C measures thickness of Non-conductive coating on conductive base.

A . Tubular Impact Tester, fall of 2lbs weight from 63.5cm Height . Suitable for Liquid Paint only B. Tubular Impact Tester, fall of 2lbs weight from 63.5cm Height and 2kg Weight From 1.2mtr heights suitable for Liquid Paint as well as Powder Coating Paint

Multi Light Color Matching Cabinet is used for visual colour matching under different light sources i.e. :Artificial Daylight, Tungsten Filament Light, Ultra Violet Light & I. R. Light

Cross Cut Tester, Made of Harden Steel, fitted with well finished wooden handle and easy operation. Head cross head a four side cut head. Each head has 10 slots. A. 1mm Head B. 2mm Head

This is a suitable apparatus for carrying out test relating to resistance to scratching under a specified load of a dried film of the paint and is used I testing paints, varnish, lacquer and related products. This is most suitable for research work or for longer laboratory and industries where repetitive quality control tests are carried out.

As per ISO 7253:1984, IS – 101 (Part 6/Sec 1 – June 1997), IS – 9000, IS – 6910, ISO – 3768 Part-I, ASTM – B – 117 – 73, ASTM – B – 368, DIN – 50021, JIS – 2371 The updated models of Salt/Cass Fog Test Chamber specially designed for evaluating the corrosion resistance of the surface treatment of metallic materials by Copper Accelerated Acetic Acid Salt Spray Test Method

Weight Per 10Ltr cup (Pycknometer) to be used for Liquid Paint. Made from stainless steel.

Flow Cup No. 4 with or w/o NABL calibration certificate. Simple flow cup of the efflux type is used for approximate measurements of apparent viscosity for control of consistency during manufacture and use of paints, lacquers and viscous products Flow cups with protective skirt are made from gun metal with stainless steel orifice and are equivalent to Type B cups. Each cup is supplied complete with a stand having leveling screws

Salt Spray Chamber for salt fog testing and corrosion testing in salt laden atmosphere. Temperature Range: From room temperature to 35°C +/-2deg.C. Humidity Range: Up to saturation limit. Control of: Digital Readout of set and actual values. Temperature Testing Chamber: Acrylic Glass of 8 mm thickness, Nozzle made of Acrylic plastic. Heating: SS Heating Element, 0.75 kW, 220V single phase AC, fitted in the salt solution tank. Solution Tank: Made of Fibre Glass, Double walled capacity 35 litres approximately with provision for water level. Chamber Stand: Made of MS Angle. Unit is supplied with Stainless Steel rods and hooks for hanging samples. It is designed to deliver compressed air at a pressure up to 1 kg/cm². Suitable for operation for 220 V, 50 Hz, Single Phase, AC supply.